Flood Tiles for Landscape and Architectural Areas
Within BlueHopper’s Minleon permanent lighting range, 20W and 50W Flood Tiles illuminate landscape and architectural areas for tree uplighting, wall washing, and other exterior applications. Their individually addressable design allows these fixtures to add broader-area illumination alongside perimeter and other compatible permanent lighting.
20W Flood Tile for Compact Exterior Areas
The Minleon RGB 20W Flood Tile operates at 24V DC and uses a compact individually addressable fixture with a 180-degree beam angle. The fixture includes a mounting yoke and stake, making it suitable for exterior areas that need a smaller flood-light format with flexible placement.
50W Flood Tile for Higher-Output Applications
The Minleon RGB+50W Flood Tile provides a higher-output option for landscape and architectural lighting. The 50W fixture uses 42 LEDs, a 120-degree beam angle, and a powder-coated aluminum housing with a glass cover for exterior installations.
Tree Uplighting and Wall Washing
Minleon identifies Flood Tiles for tree uplighting, wall washing, and general landscape lighting. These applications let the permanent-lighting layout move beyond rooflines and perimeter lines by directing controlled light across trees, walls, façades, and other larger exterior surfaces.
Individually Addressable Lighting
Each Flood Tile can be controlled individually rather than operating only as part of one fixed-output circuit. Compatible control systems can therefore coordinate separate fixtures, allowing different landscape or architectural areas to participate in programmed lighting scenes and effects.
Grouped with Permanent and Landscape Lighting
Minleon Flood Tiles can be grouped and synchronized with compatible permanent, holiday, and landscape lighting. This allows flood-lit surfaces and landscape features to operate alongside perimeter lighting rather than functioning as completely separate exterior-lighting installations.
Built for Outdoor Installations
BlueHopper’s 20W Flood Tile uses UV-protected wiring, a powder-coated aluminum housing, a glass cover, and an IP65 rating. The 50W Flood Tile uses UV-protected four-conductor wiring, an aluminum housing with a glass cover, and IP66 protection for exterior applications.
24V Power and Compatible Control
Both BlueHopper Flood Tile formats operate at 24V DC and support individual control through compatible MeshTek controllers. The 20W fixture supports approximately three to four lamps before additional power injection under BlueHopper’s published specifications, while the 50W model supports two fixtures per line before additional power is required.
Choosing Between 20W and 50W Flood Tiles
The choice between the 20W and 50W formats depends on the size of the area, desired coverage, installation position, and lighting objective. The 20W fixture provides a compact 180-degree flood format, while the 50W model provides a larger fixture with a 120-degree beam for applications requiring greater output across architectural or landscape surfaces.
Minleon Flood Tiles from BlueHopper
BlueHopper provides 20W Minleon Flood Tiles and 50W Minleon Flood Tiles for landscape, architectural, wall-washing, and uplighting applications within compatible permanent exterior-lighting layouts.
