Pebble Lights for Building Perimeters
Within BlueHopper’s Minleon permanent lighting range, Pebble lights cover building perimeters with 2- or 4-LED configurations, 180- or 360-degree viewing angles, and track or clip mounting for different exterior layouts. Their compact pixel format and high visibility make Pebble lights useful where individual points of light need to follow a building perimeter and remain visible from a distance.
Built for Permanent Outdoor Installation
Minleon P50T Pebble lights use extra insulated wire and a 4-wire DoubleDATA connection for permanent installations. The second data line provides another path for the control signal so one failed pixel does not interrupt the rest of the string. The P50T configuration also uses UV-protected 20 AWG wiring, 4-pin twist-lock connectors, and IP66-rated construction for outdoor installations.
Flexible Spacing for Different Layouts
P50T Pebble lights are available with 4-, 6-, or 12-inch spacing as well as custom spacing options. Different spacing choices let the lights follow shorter architectural sections, longer building perimeters, and layouts that require wider or tighter distances between visible pixels.
Different Viewing Angles
Pebble lights are available in single-sided and double-sided configurations, while BlueHopper lists 180-degree and 360-degree viewing options across its Minleon Pebble range. The viewing configuration can therefore match whether the lights primarily face one direction or need visibility from multiple sides.
Track and Clip Mounting
Minleon Pebble lights can mount inside permanent track or attach with dedicated Pebble clips. Track keeps pixels aligned along a perimeter, while clip mounting allows more flexibility around individual exterior features. Minleon also produces molded-clip and magnetic Pebble configurations for applications that require different mounting approaches.
Individually Addressable Lighting
Each P50T Pebble is individually addressable, allowing individual pixels to participate in coordinated colors, dimming, and effects across the lighting run. The P50T uses 12-bit grayscale with 4,096 dimming levels and supports compatible Minleon, MeshTek, ArtNet, and E1.31 control systems.
24V Power for Longer Perimeter Runs
P50T Pebble lights operate at 24V DC and use approximately 0.36 watts per pixel under Minleon’s published controller specifications. Under those conditions, Minleon lists approximately 200 lights or about 220 feet before additional power injection, although actual limits can vary with the controller, software, spacing, and installation configuration.
Perimeter and Decorative Applications
Minleon identifies P50T Pebble lights for perimeter lighting, light-line trees, wire frames, street banners, low-resolution grids, and interior track lighting. Multiple spacing, viewing, and mounting configurations allow the same compact pixel format to adapt to different permanent and decorative lighting layouts.
Minleon Pebble Lights from BlueHopper
BlueHopper provides Minleon Pebble Lights with multiple LED, viewing-angle, wire, mounting, and control configurations for permanent perimeter and decorative lighting applications.
